Mapei Keraquick Grey Rapid Setting Flexible S1 Adhesive 20Kg
£16.50 INC VAT
Description
Rapid setting, high performance, S1 flexible cementitious adhesive for the installation of ceramic, porcelain and stone tiles and mosaics to floors
Keraquick Easy S1 is a Cementitious (C) Improved (2), Fast Setting (F) Deformable (S1) tile adhesive classified as C2F S1.
Where To Use:
For interior and exterior installations of ceramic, porcelain and moisture-stable natural stone tiles and mosaics to cement-based and suitably prepared calcium sulphate-based screeds, concrete, plywood overlaid floors, existing unglazed ceramic floor tiles, tile backer boards.
Some Application Examples:
▪ Renovation in heavily trafficked areas and where surfaces need to be quickly back in service, such as public buildings, motorway services, pedestrian walkways, supermarkets, showrooms, airports etc.
▪ Rapid installation or renovation in swimming pools, industrial plants (breweries, wine cellars, dairies etc.), and refrigeration units.
▪ Rapid installation in bathrooms, showers, kitchens, conservatories and on balconies and terraces.
▪ The installation of tiled finishes to underfloor and under-tile heating systems.
▪ The installation of non-absorbent floor tiles over existing floors, where a standard setting adhesive would be too slow.
▪ The installation of large format tiles due to the product's excellent wetting-out capabilities.
▪ The installation of ceramic and porcelain tiles directly over under tile heating cables.
▪ The installation of tiles externally in autumn/winter when nighttime temperatures drop below +5ºC.
Specification
Type: Powder
Colour: White.
Bulk Density(Kg/m ): 1400.
Dry Solids Content (%): 100.
Mixing Ratio: 100 Parts of Powder With 24-26 Parts by Weight of Water.
Consistency of Mix: Creamy Paste.
Density of Mix (Kg/m ): 1500.
Ph of Mix: Approx. 11.
Pot Life: 30 Minutes.
Application Temperature Range: From +5°c to +30°c.
Open Time (According to en 1346): 15 – 20 Minutes.
Grouting Joints: 2 – 3 Hours.
Set to Light Foot Traffic: 2 – 3 Hours.
Ready for Use: 24 Hours (3 Days for Water Features and Swimming Pools).
Tensile Adhesion Strength According to en 1348 (N/mm):
- Initial (After 28 Days): 2.0.
- After Heat Ageing: 1.80.
- After Water Immersion: 1.0.
- After Freeze-thaw Cycles: 1.0.
Resistance to Acids: Fair.
Resistance to Alkali: Excellent.
Resistance to Oils: Excellent.
Resistance to Solvents: Excellent.
Temperature When in Use: From -30°c to +90°c.
Deformability According to en 12004: S1 - Deformable.
Storage & Shelf Life: 12 Months When Stored Off the Ground in the Original Unopened Packaging Protected From High Humidity.
